基于高导热材料填充漏失构造的深井换热器性能分析   总被引：1，自引：0，他引：1  

卜宪标  蒋坤卿  李华山  王令宝 《地质学报》2020,94(7):2139-2146

地热供暖可有效缓解北方雾霾天气。干热岩虽然储量丰富，但增强型地热技术由于开发费用较高，裂隙控制以及避免诱发地震的技术尚不成熟，现阶段还不能商业化应用。水热型地热开发技术虽较成熟，但受资源条件的限制，开发规模较小。对于大多地区，受地质构造和资源禀赋的控制，单井产水量较低或者回灌难，开发经济效益较差。深井换热器（DBHE）技术是开采地热水低产区或回灌难地区热能的有效方式，但受制于岩石导热系数低，单井输出功率小，投资回收期长。为提高DBHE的输出功率，本文提出了增强型深井换热器（EDBHE），通过主动将高导热性能的复合填充剂流进漏失构造的方式提高岩石的导热性能，通过调节回压、密度和黏度来控制漏失量。研究结果表明，单井EDBHE十个采暖季的平均取热功率为1002. 34 kW，是DBHE(424. 45 kW)的2. 36倍。而双井EDBHE十个采暖季的平均取热功率更是达到了27501. 61 kW，且热输出稳定，每年的衰减率0. 95%。EDBHE技术有效利用了出水量低或回灌难的水热型热储，大幅提高了其出力，扩大了地热供暖的应用范围。  相似文献   

潮页1井钻探施工技术          下载免费PDF全文

王世炬  刘昕伟  王烁  徐明曙  纪卫军 《探矿工程》2020,47(10):33-37

潮页1井是在潮水盆地布置的第一口页岩气资源调查井，取心质量要求较高，地层有大段泥页岩层段，易水化剥落，施工难度大。本文着重介绍了潮页1井取心工艺、钻头选型、冲洗液技术及井斜控制技术等相关的施工经验。潮页1井采用大口径绳索取心技术，第四系地层以深全井取心，该技术在甘肃地区鲜有可供参考的施工案例，而该井岩心采取率接近90%。钻进过程中通过选用合理的钻进参数和护壁性能较强的冲洗液体系，解决了施工中遇到的地层“打滑”、井壁稳定性差等技术难点，保障了潮页1井的顺利完工。  相似文献   

Wedge impact with the influence of ice     

《Applied Ocean Research》2019

This work presents a canonical study on a wedge entering water near a single piece of ice using computational-fluid-dynamics (CFD) and a Wagner-type theoretical model with corrections for non-linear effects. Calculations for a series of conditions with ice of different sizes and locations relative to the wedge are conducted. The hydrodynamic force due to impact, the pressure distribution on the wedge surface, and the pile-up phenomenon are examined to study the role of ice in the impact process. The theoretical model is shown to be accurate and can serve as a useful method to assess slamming loads under the influence of ice. It is shown that even for the case of a small piece of ice, the slamming force on the wedge can increase by 30%.  相似文献   

Mineralogy,Fluid Inclusion,and Hydrogen and Oxygen Isotope Studies of the Intrusion‐Related Yangla Cu Deposit in the Sanjiang Region,SW China: Implications for Metallogenesis and Deposit Type     

Li‐Juan Du  Bo Li  Zhi‐Long Huang  Jun Chen  Jia‐Xi Zhou  Guo‐Fu Zou  Zai‐Fei Yan 《Resource Geology》2020,70(1):28-49

The Yangla deposit is an intrusion‐related Cu deposit in the Jinshajiang tectonic belt (eastern Sanjiang region, SW China). Despite extensive studies that have been conducted on this deposit, the relationship between the granitic magma and Cu mineralization is still unclear, and hence, the genesis is debated. To answer this question, we conducted an integrated study of mineralogy, fluid inclusions (FIs), and hydrogen and oxygen (H‐O) isotopes. Three mineralization stages were identified based on the ore textures, alteration zonation, and crosscutting relationships: (i) pre‐ore prograde skarn (stage I), with the garnet and pyroxene dominated by andradite and diopside, respectively; (ii) syn‐ore retrograde alteration (stage II), which is subdivided into the early syn‐ore stage (stage IIa) marked by retrograde hydrated mineral assemblages and significant Fe‐Cu‐Mo‐Pb‐Zn sulfide mineralization, and the late syn‐ore stage (stage IIb) featured by quartz‐calcite veins; and (iii) late supergene mineralization (stage III), which is characterized by secondary azurite and malachite. These results of mineralogy, FIs, and H‐O isotopes indicate that: (i) Cu mineralization has a close temporal, spatial, and genetic relationship with skarn alteration; (ii) the ore fluids were magmatic dominated with late‐stage meteoric water incursion; and (iii) Type‐S (halite‐bearing) and Type‐V (vapor‐rich) FIs coexisted in garnet and clinopyroxene of stage I, indicating that fluid boiling might have occurred during this stage. From stage I to stage IIa, the FI type transformed from Type‐S + Type‐V + Type‐L (liquid‐rich) to Type‐V + Type‐L with the conduct of mineralization and was accompanied by the disappearance of Type‐S, and homogenization temperature and salinity also tended to decrease dramatically, which may be caused by the deposition of skarn minerals. At stage IIa, boiling of the ore fluids still continued due to the change from lithostatic to hydrostatic pressure, which triggered the precipitation of abundant quartz‐Cu‐Mo‐Fe sulfides. Furthermore, fluid mixing between a high‐temperature magmatic fluid and a low‐temperature meteoric water might cause a considerable drop in temperature and the deposition of Cu‐bearing quartz/calcite veins during stage IIb. Hence, we consider the Yangla deposit to be of a skarn type, genetically related to the Mesozoic magmatism in the Sanjiang region.  相似文献   

南海IODP 349航次基底玄武岩中碳酸盐岩脉的岩石学特征*     

许佳锐  陈毅凤  王宝云 《热带海洋学报》2018,37(6):63-73

国际大洋发现计划(International Ocean Discovery Program, IODP)349航次在南海东部次海盆和西南次海盆残留扩张脊附近的U1431和U1433站位首次钻取基底玄武岩, 通过对16块基底玄武岩内的碳酸盐岩脉薄片镜下观察以及激光拉曼光谱分析, 揭示碳酸盐矿物为方解石和文石, 为典型的洋壳低温热液蚀变次生矿物。U1431站位碳酸盐岩脉为独立的方解石脉、文石脉交替出现; 而U1433站位则存在方解石脉、文石脉和方解石-文石共生脉三种情况。此外, U1431站位在基底~42.1m处出现了平行的方解石脉和文石脉, 揭示U1431存在不同来源热液的多期活动, 即可能存在多次或多阶段不同的热液注入。U1431和U1433站位的碳酸岩脉中, 文石的矿物集合体形状基本一致, 呈块状、纤维状和放射纤维状; 而方解石存在差异, U1431的方解石以斑块状、块状、粒状和纤维状出现, 而U1433的方解石仅出现块状。U1431站位的碳酸盐岩脉的丰度明显高于U1433站位。这些均揭示U1431站位的低温热液活动强, 而U1433站位则相对弱。两个站位的热液活动不同很可能是由于区域地质环境的差异造成——U1431附近的巨大海山为其提供了热液补给, 而U1433远离热液的补给/渗漏点。  相似文献   

Application of computational fluid dynamics simulation for submarine oil spill     

YANG Zhenglong  YU Jianxing  LI Zhigan  CHEN Haicheng  JIANG Meirong  CHEN Xi 《海洋学报(英文版)》2018,37(11):104-115

  相似文献   

滇西镇康放羊山Cu-Pb-Zn多金属矿床流体包裹体和C-O同位素研究     

陈伟  邓明国  耿齐卫  管申进  孔志岗  贾祯  张海 《岩石矿物学杂志》2020,39(6):780-794

滇西镇康放羊山Cu-Pb-Zn多金属矿床是保山地块发现的首个富铜的铅锌多金属矿床。为探讨其成矿流体来源和矿床成因，对该矿床开展了流体包裹体和C-O同位素研究。结果表明，阶段Ⅱ主要发育富液相包裹体，均一温度和盐度（NaCl_eq，质量分数）集中在240～300℃和8.0%～18.0%；阶段Ⅲ以含CO₂和子矿物包裹体为特征，均一温度和盐度的两个峰值为360～400℃、16.0%～24.0%和240～320℃、4.0%～14.0%；阶段Ⅳ以富液相和纯液相包裹体为主，均一温度和盐度降低至220～340℃和8.0%～14.0%。C-O同位素分析结果（δ¹³C_V-PDB值为-5.88‰~-2.37‰，δ¹⁸O_V-SMOW值为8.18‰~12.79‰）显示成矿流体主要来源于岩浆热液，在迁移过程中受到围岩溶解作用的影响。综合研究认为，放羊山矿床阶段Ⅱ和阶段Ⅲ的成矿流体主要来源于大陆碰撞形成的中高温、中高盐度、富CO₂岩浆热液，在阶段Ⅲ晚期和阶段Ⅳ受到中低温、低盐度大气降水的影响；矿床为受构造控制明显的中高温热液矿床，预测在矿区深部有望找到矽卡岩型矿体。  相似文献   

气举反循环钻进井壁稳定及适用性探讨          下载免费PDF全文

郑伯乐  郑秀华  段晨阳  叶宏宇 《探矿工程》2020,47(6):13-18

气举反循环工艺具有钻进效率高、携带岩屑能力强、防漏效果好以及钻头寿命长等优点，同时还可以提高流体矿产的产能。但是一般认为气举反循环钻进抽吸作用会产生负压，不利于井壁稳定，不宜在松散地层应用。本文通过计算气举反循环钻进环空水力参数，并从环空压力以及冲洗液流态、流速等方面探讨研究气举反循环钻进中井壁稳定及其适用性，指出通过选取合适的钻具组合以及调节冲洗液性能，可使气举反循环工艺对不同地层的适应性更广。  相似文献   

黑龙江省东宁县五道沟金矿成矿流体特征及矿床成因     

方焱  何谋惷  丁振举  徐怡然  魏连喜 《现代地质》2020,34(2):254-265

五道沟金矿位于太平岭金-铜多金属成矿带,矿体呈脉状赋存于下二叠统双桥子组碳质板岩中,并严格受NE向断裂控制。根据野外观察和岩相学研究,将五道沟金矿成矿划分为早期石英阶段、石英-黄铁矿阶段、石英-碳酸盐阶段3个阶段,其中石英-黄铁矿阶段为主要成矿阶段。石英流体包裹体显微测温和拉曼光谱分析表明,金成矿期流体为中低温、低盐度的含CO₂流体。氢氧同位素分析表明,成矿流体是岩浆水和大气降水的混合流体。黄铁矿微量元素特征表明矿区内黄铁矿为岩浆热液成因;矿石硫同位素数据显示其具有岩浆硫和地层硫的混合特征。铅同位素组成图上,矿石铅、围岩铅和岩浆岩铅三者呈线性关系,具有同源特征,矿石中²⁰⁷Pb/²⁰⁴Pb和²⁰⁸Pb/²⁰⁴Pb值明显高于围岩的相应值,暗示了矿石铅为围岩铅淋滤产物。矿石同位素特征表明双桥子组碳质板岩应为金矿矿源层。综合矿床地质特征、流体包裹体和H-O-S-Pb同位素分析,认为五道沟金矿为造山型金矿。  相似文献   

秦岭造山带多金属矿普查复杂地层护壁堵漏技术          下载免费PDF全文

柳硕林  韩明耀 《探矿工程》2020,47(1):43-47

秦岭造山带多金属矿普查项目钻探施工过程中钻遇多种复杂地层，垮塌、缩径、漏失等复杂情况频发，严重影响了施工效率。分别采用了植物胶钙处理钻井液、聚乙烯醇无固相钻井液等进行护壁工作，结合不同漏失情况分别实施了随钻堵漏、凝胶堵漏等技术措施，取得了良好的使用效果。  相似文献